China Professional Manufacturer Stainless Steel Conveyor 5tons Chain And System Parts
Product Introduction
| ITEM/MODEL | UH-5075-S | UH-5075-HH | UH-5075-HV | UH-5075-HA |
| Suspension spacing | 150 | 150 | 150 | 150 |
| Chain's weight | 4.2 | 4.58 | 4.83 | 5.3 |
| Single-span weight | ≤35 | ≤40 | ≤45 | ≤50 |
| Chain's allowable pull force | ≤3000 | ≤3000 | ≤3000 | ≤3000 |
| Chain's catastrophic pull force | ≥5500 | ≥5500 | ≥5500 | ≥5500 |
| Working temperature | ≥250 | ≥300 | ≥300 | ≥400 |
Product specification
Advantage
* Large angle bending space
* High mechanization & automatization
* Close -up continual conveying equipment
* Work perfectly together with the ground facilities
* Make any turns on both horizontal plane and vertical planes
Application
Conveyor chain is closeup continual conveying equipment widely applied for continual convey of various industrial work pieces, such as surface treatment, powder coating, paint spraying, drying, oven, cooling room and plaing the finished products off the line, furniture factories, bicycle plants,electronic products factory, hardware factory.
Other Accessories
Other spare parts for Cheap overhead trolley chain conveyor powder coating
Track: Used where the conveyor chains go straight. Standard length for delivery is 3 meters. It can be cut to its use according to its specific installing conditions.
Driver Device: standard type, heavy-duty type;
Operating principle: the driving device adjusts the momentum that the motor output, after the power increased by speed reduction, it will pass to driving caterpillar, the pusher dogs will stir the chain to move forward.
Take up Device: it is to keep the chain in the state of original tension, compensate the tensile deformation caused by tensile force or temperature while working. Make sure certain tensile force exists between driving device and take-up device. It is usually placed on the back. Heavy type take-up device is depended on the weight of the heavy plate on device, to adjust the looseness and tenseness of the chains so as to assure the normal operation of the driving device. Relatively stable tensile force and widely applied.
Hanger: Cross type disk hanger, sprocket wheel hanger, Y type hanger, Cross type hanger, electroplating hanger, U type Hanger,Bearing hanger
Other Accessories: hanger turner, track flange, track install hanger,check track, Manual /automatic oil feeding cup Automatic oil sprayer
FAQ
1. Chain Material:16# Medium-carbon steel, Steel A3
2. Track material: Steel A3
3. The drive system better to be 5~7 meters after the adjust seat
4. If dont move, check if any straight and curve rails; check the motor and chain; check if use high temperature chain lubricant
5. If chain fall of the drive, check the driving wheel
Contact
We have professional engineer to design you a whole overhead conveyor chain line.
Cici Lei
Mobile/Wechat/ Whatsapp: 008618716717704
QQ:2282925425
Product Tags:
|
|
5 Tons 42mm Stainless Steel Conveyor Chain System For Workshops Images
|
